The activity of the rGO-TiO2 composite was tested by the photocatalytic reduction of CO2 under visible light irradiation. The composite displayed excellent photocatalytic activity, achieving a maximum CH4 product yield of 0.135 μmol gcat −1 h−1, which is 2.1- and 5.6-fold higher than that achieved by graphite oxide and pure anatase. The incorporation of rGO into the composite led to the reduction of band gap, rendering the rGO-TiO2 hybrid material sensitive to Selleckchem Adriamycin visible light irradiation

(λ < 400 nm). In addition, the photoinduced electrons can easily migrate to the rGO moiety, leading to the efficient separation and prolonged recombination time of charge carriers. These contributions, together with increased reactant adsorption, are the primary factors in the enhancement of the rGO-TiO2 photoactivity. In contrast to the most commonly used high-power halogen and xenon arc lamps, we demonstrated

that our photocatalysts were active even under the irradiation of low-power, energy-saving light bulbs. Interestingly, we have also found that graphite oxide was active in the photoconversion of CO2 into CH4 gas under visible light irradiation. Ongoing research is being carried out to develop more complex rGO-based semiconducting materials for the efficient conversion of CO2. We believe that our findings could open up a scalable and cost-effective approach to obtain robust materials for photocatalytic applications. Acknowledgements The work was funded by the Ministry of Higher Education (MOHE), Malaysia, under the Long-Term Research Grant Scheme (LRGS) (acc. no.: 2110226-113-00) and the Fundamental Selonsertib research buy Research Grant Scheme (FRGS) (ref. no.: FRGS/1/2013/TK05/02/1MUSM). Electronic supplementary material Additional file 1: Preparation of graphite oxide powder. Detailed experimental procedure

with two accompanying figures. (PDF 502 KB) References 1. Yamasaki A: An overview of CO 2 mitigation options for global warming-emphasizing CO 2 sequestration options. J Chem Eng Jpn 2003,36(4):361–375.CrossRef 2. Hashim H, Douglas P, Elkamel A, Croiset buy Erastin E: Optimization model for energy planning with CO 2 emission considerations. Ind Eng Chem Res 2005,44(4):879–890.CrossRef 3. Dhakshinamoorthy A, Navalon S, Corma A, Garcia H: Photocatalytic CO 2 reduction by TiO 2 and related titanium containing solids. Energy Environ Sci 2012,5(11):9217–9233.CrossRef 4. Liu G, Hoivik N, Wang K, Jakobsen H: Engineering TiO 2 nanomaterials for CO 2 conversion/solar fuels. Sol Energy Mater Sol Cells 2012, 105:53–68.CrossRef 5. Yui T, Kan A, Saitoh C, Koike K, Ibusuki T, Ishitani O: Photochemical reduction of CO 2 using TiO 2 : effects of organic adsorbates on TiO 2 and deposition of Pd onto TiO 2 . ACS Appl Mater Interfaces 2011,3(7):2594–2600.CrossRef 6. Kohno Y, JAK inhibitor Tanaka T, Funabiki T, Yoshida S: Photoreduction of CO 2 with H 2 over ZrO 2 . A study on interaction of hydrogen with photoexcited CO 2 .